Printable Polyimide film (Tape)

Structure
The printable polyimide film is made from polyimide film by coating a special white printable coating. Then apply silicone adhesion on the other side.  

Usage
The printable polyimide tape is used for circuit board bar code. It can withstand 250℃ working temperature. 　

Features
Thickness of backing film: 1mil (0.025mm)
Total thickness (without silicone adhesion): 0.085mm
Peeling strength: 6N/25mm
Tensile strength: 115N/25mm
Elongation: 45%
Breakdown voltage: 5kV
Heat resistance: 270℃/5mins

Package & Supply
Packing: in rolls packed with shrinkable plastic film. Then in paper cartons.
Standard length: 100m
Width: from 7mm to 500mm